Pearl Inlay Ordering Information
- The minimum order for computer made production inlays is 1 run. Logos usually yield 32 or 48 depending on the size and length of cut. Fingerboard inlays run 18, 12, or 6. Peghead inlays run 18 to 36.
- The actual quantity shipped and charged will be the RUN TOTAL unless you have a purchase order for monthly shipments.
- Phenolic or lexan pin router templates are available
- Peghead cavities are cut 9 or 18 at a time. Inlaid and sanded pegheads can be ordered as a full run or in quantities of 9 with subsequent batches of peghead veneers routed until all inlays ar used. Batches of veneers require a monthly purchase order.
- Inlaid fingerboards run in multiples of 6. all fingerboard runs less than 6 will be charged an additional 20%
- Purchase orders can be faxed 512-442-4371, e-mailed or enclosed with parts.
- Peghead veneers can be profiled to shape or only locating holes cut. We drill fingerboards for our standard locating holes.
- Peghead veneers should be at least .070" thick. No 1/16" fiberboard please.
- Please pencil instructions on all fingerboard and peghead veneers sent.
- All new jobs require CAD drawing and setup. A one time programming fee at $50.00/hour will be charged.
- Customer's artwork is requested in DXF format delivered via email. If you do not have access to DXF format contact us for other exceptable formats.
- All initial orders must be pre-paid by credit card.
- Jobs are priced by length of cut, number of pieces, number of corners, material and are figured from the finished CAD drawing.
- Typical pries for script logos are $10-$16 loose or $18-$24 inlaid.
- Prices are subject to change without notice.
- All original designs by Precision Pearl Inc. and Tom Ellis are the property of Tom Ellis and are usually available for licensing of use. The actual inlay does not constitute sale of copyright.
- All customer's designs are the property of that customer and are not available for other use.
